Magic Wand
A magic wand toy for kids aged 2–5 years.
The wand consists of a star-shaped top part and a bottom handle. Both printed parts are connected using a wooden pole with a diameter of 1 cm and a length of 25 cm.
Used dual-color red-blue silk PLA for a magical-looking effect.
Print Settings
| Setting | Value |
|---|---|
Layer Height | 0.2 mm |
Nozzle Diameter | 0.4 mm |
Material | PLA |
Colors | Red / Blue |
Slicer Settings
| Setting | Value |
|---|---|
Infill | 15% |
Infill Pattern | Gyroid |
Perimeters | 2 |
Supports | Yes |
Support Type | Organic supports recommended |
Brim | Yes |
Printing
Unfortunately, the top part requires supports. Organic supports are recommended.
Assembly
Insert a wooden pole into the bottom handle and the top star part.
Recommended pole size:
- Diameter: 1 cm
- Length: 15 - 25 cm
Depending on the fit, the wooden pole can be glued in place for a stronger connection.
Notes
This is a toy for small children, so make sure all edges are smooth and the parts are firmly attached before use.
Files Included
License
CC BY-NC-SA
Free for personal use and remixing. No commercial use or selling prints without explicit permission.
